Our Services

PCB Layout,PCB fabrication, Components procurement,Turn-key PCB
One-stop PCB services Provider.


Multilayer PCB

Multilayer PCB

Manufacturing Multilayer PCBs (Up to 36 Layers)

The demand for multilayer boards has been on the rise. The drive for electronics to be smaller, faster, and more powerful has made the multilayer PCB much more popular. The ability to create multilayer boards opens up a world of possibilities allowing the engineer to create more densely populated circuit boards which allows miniaturization. This is a huge benefit that double sided boards are not able to offer.

Multilayer PCBs are only a little different that the Double Sided PCBs.

Multi Layer PCB StackupAs you can see in the image to the right, a four-layer board starts with a rigid core of FR4 and copper. The internal core is processed for traces on those prior to the other fiberglass and copper being added, and the entire board is laminated together.

Multi-layer pcb

Multi-layer pcb

There is the B stage PrePreg, which is fiberglass that is still soft that will need to be heated in order to become rigid. It acts like a glue to keep the inner core adhered to the outer copper foil.

The copper foil added consists of very thin and loose sheets of copper. They are sandwiched together with the Prepreg and inner core, and placed in a PCB Lamination Press. Pressure and heat are applied to the material, which causes the Prepreg to “flow” and bind the layers together. Once it cools, the fiberglass is then hard and the entire board is very rigid.

After lamination of the board, the outer layers are processed for traces and drilling. We will discuss those steps in greater detail in later articles.

That gives the basics of the starting material for a Double Sided PCB and Multi Layer PCB. Is it what you expected or thought it would be?

For Multilayer PCB , We support Fr4, Rogers , Aluminum , Flexible PCB material . Welcome to send your design to xilinluck@gmail.com.

Introduction:

Double-sided pcb have one layer dielectric layer in the middle, both sides are traces layer. Multilayer PCB is a multilayer traces layer, a dielectric layer between each 2 layer, a dielectric layer may be made very thin layers . Multilayer circuit board having at least three conductive layers, wherein the outer surface 2layers, while the remaining one was synthesized in the insulating plate. Electrical connection between them is usually done by plated through holes in the circuit board on the implementation of the cross section

Types:

2-28 layer is available in our factory,

Multilayer pcb use in professional electronic equipment (computers, military equipment), especially in the case of the weight and volume overload. In high-speed circuits, the multi-substrate is also very useful, they can provide more than two layer boards for the printed circuit board designers to laying cable, and provides a large area of ground and power.




Time

Time

Quick response mechanism
Permanent resistance capacitance, inductor magnetic bead connector
Regular research and development purchase, within two weeks

Demand

Demand

Buy and sell, solve the problem of research and development
Professional supply chain team support
We can also enjoy VIP customer service

Accuracy

Accuracy

Professional component authentication engineer
Perfect IQC inspection system
Assist to improve customer BOM accuracy.

Storage

Storage

1, 600 square meters of central warehouse
Yageo、Murata、Avx、Kemetresistance-capacitance
Temperature and humidity control, advanced first out mechanism.


Top